dc.contributor.advisor | Chacón Sánchez, Víctor | |
dc.contributor.author | Cahuana Casani, Elias Jonathan | |
dc.date.accessioned | 2024-03-22T16:18:47Z | |
dc.date.available | 2024-03-22T16:18:47Z | |
dc.date.issued | 2023-08-18 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12557/6151 | |
dc.description.abstract | La presente investigación trata de la respuesta estructural de los elementos que conforman
un superestructura de concreto armado, estos elementos en mención son columnas y vigas
que tienen una representación unida de elementos aporticados que en su gran medida
tienen varias construcciones de concreto armado tipo pórtico en toda la región del cusco
y en gran medida en nuestro país Perú.
Entre los objetivos de esta tesis es Determinar la calidad en valor de resistencia a
compresión F´c establecido por norma E060, que en concretos endurecidos se considera
concreto estructural a aquellos elementos estructurales que son mayores a los 17 MPA,
en la presente investigación se hizo el análisis correspondiente en las superestructuras
mediando ensayos de esclerometría y verificándose en gran medida concreto no
estructural es decir debajo de los 17 MPA en la superestructura sin asistencia de personal
técnico a diferencia de la otra superestructura. El segundo objetivo de la presente
investigación es verificar las derivas de entrepiso en las dos superestructuras en análisis,
recopilando información del problema específico número uno, con el programa etabs para
dimensionar las medidas reales y mediante hojas de calculo en excel para determinar la
cortante basal dinámica y periodo obtenemos dichas derivas de entrepiso donde la
superestructura con asistencia de personal técnico tiene déficit en la dirección “Y” en el
segundo nivel, esto no aportando la rigidez esperado respecto de la superestructura sin
asistencia de personal técnico que no se encontró déficit alguno. El tercer objetivo de la
presente investigación es determinar la flexo compresión biaxial en columnas en relación
demanda – capacidad, recopilando información del primer problema en especifico y
ayudándonos con la representación de las superestructuras en el programa etabs y con las
condiciones de cargas asistidas que nos da la norma E060 obtenemos el resultado final
del diagrama de interacción biaxial en columnas con mayor representación de interacción
donde obtenemos resultados en demanda máxima y dentro de lo esperado en la
superestructura con asistencia técnica, respecto de resultados de interacción fuera de la
demanda y déficit en la superestructura sin asistencia de personal técnico. El cuarto
problema en especifico es verificar la ductilidad en vigas en las dos superestructuras en
análisis, recopilando información del problema especifico uno y mediante hojas de
cálculo obtenemos la ductilidad final donde la superestructura con asistencia de personal
técnico tiene resultados al límite de ductilidad ocho dado por la norma E030 a diferencia
de la superestructura sin asistencia de personal técnico donde se encontraron resultados
por debajo de ductilidad ocho y encontrándose en déficit y problemas de ductilidad. | es_PE |
dc.description.abstract | This research deals with the structural response of the elements that make up an armed
concrete superstructure, These elements in mention are columns and beams that have a
united representation of aporticated elements that in their great measure have several
constructions of reinforced concrete type portico throughout the region of cusco and to a
large extent in our country Peru.
Among the objectives of this thesis is to determine the quality in value of compressive
strength F´c established by standard E060, that in hardened concrete if considers
structural concrete to those structural elements that are greater than 17 mpa In the present
investigation the corresponding analysis was made in the superstructures mediating
sclerometry tests and verifying to a large extent non-structural concrete ie below 17 mpa
in the superstructure without assistance of technical personnel unlike the other
superstructure. The second objective of this research is to verify the mezzanine drifts in
the two superstructures under analysis, gathering information of the specific problem
number one, with the program etabs to dimension the real measurements and by means
of spreadsheets in excel to determine the dynamic basal shear And period we obtain these
mezzanine drifts where the superstructure with assistance of technical personnel has
deficit in the direction “Y” in the second level, this not providing the expected rigidity
with respect to the superstructure without assistance of technical personnel that no deficit
was found. The third objective of this research is to determine the biaxial flexo
compression in columns in relation demand - capacity, Gathering information of the first
problem in specific and helping us with the representation of the superstructures in the
etabs program and with the conditions of assisted loads that gives us the E060 standard
we obtain the final result of the biaxial interaction diagram in columns with greater
interaction representation where we obtain results in maximum demand and within the
expected in the superstructure with technical assistance, The fourth specific problem is to
verify the ductility in beams in the two superstructures under analysis, gathering
information of the specific problem one and by means of spreadsheets we obtain the final
ductility where the superstructure with assistance of personnel Technician has results at
the eight ductility limit given by the E030 standard unlike the superstructure without
assistance of technical personnel where results were found below ductility eight and
found in deficit and ductility problems. | en_US |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Andina del Cusco | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/4.0/ | es_PE |
dc.subject | Estructura | es_PE |
dc.subject | Ductibilidad | es_PE |
dc.subject | Interacción biaxial | es_PE |
dc.title | Análisis de la respuesta estructural de los componentes estructurales bajo la acción de sismo en una superestructura de concreto armado tipo pórtico con asistencia de personal técnico, respecto de una superestructura de concreto armado tipo pórtico sin asistencia de personal técnico | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
thesis.degree.grantor | Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.01.01 | es_PE |
renati.advisor.dni | 23807993 | |
renati.advisor.orcid | https://orcid.org/0000-0001-6891-6902 | es_PE |
renati.author.dni | 48064167 | |
renati.discipline | 732016 | es_PE |
renati.juror | Pezo Zegarra, Eliot | |
renati.juror | Gutierrez Campana, Omar | |
renati.juror | Gudiel Cárdenas, Mitsy Elena | |
renati.juror | Cayo Mancilla, Renzo | |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |