dc.contributor.advisor | Merino Yépez, Robert Milton | |
dc.contributor.author | Mansilla Gomez, Royer Elwer | |
dc.date.accessioned | 2024-03-26T15:45:11Z | |
dc.date.available | 2024-03-26T15:45:11Z | |
dc.date.issued | 2023-11-06 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12557/6160 | |
dc.description.abstract | La presente tesis ha sido elaborada en la ciudad del Cusco, se analiza cómo varían
las propiedades físico-mecánicas de la madera de eucaliptus glóbulos tratada con parafina,
cera de abeja y aceite de cocina usado para uso estructural en Pisac. La aplicación se realiza
por inmersión prolongada, el alcance de la investigación es descriptivo correlacional,
busca especificar las propiedades físico-mecánicas de la madera que se someta a un
análisis, que pretende medir y recoger información. El estudio es cuantitativo y aplicativo,
el objetivo es demostrar experimentalmente los cambios en la madera en su estado natural
como cuando es tratada. Se realizo un breve estudio del lugar identificando de que cumpla
con las características, el estudio de la población se centró en el Distrito de Pisac y en la
cuantificación se recogió un total de 720 muestras, Estas muestras se clasifican en cuatro
grupos, 180 muestras en estado natural, 180 muestras tratadas con Parafina, 180 muestras
con Cera de Abeja y 180 con Aceite de Cocina Usado. La madera fue cortada, transportada
y almacenada de acuerdo a la Norma, las muestras fueron evaluadas en el laboratorio de
la Facultad de Ingeniería y Arquitectura de la Universidad Andina del Cusco. Se realizaron
los siguientes Ensayos respectivos y se tuvo como resultado; las muestras de madera
tratadas con parafina, Cera de Abeja y Aceite de Cocina Usado, presento una mejora
significativa. En el ensayo de contenido de humedad, las muestras tratadas revelan
resistencia a los agentes como hongos, polilla y entre otros. En el ensayo de dureza de
Brinell, la madera exhibe la capacidad de soportar cargas y resistirlas eficazmente. En los
ensayos de resistencia a la compresión paralelo y perpendicular al grano, resistencia al
cizallamiento y resistencia a la flexión estática muestran que la madera Eucaliptus
Glóbulos tratada con Parafina, Cera de Abeja y Aceite de Cocina Usado tiene una mejora
significativa y pueden utilizarse con fines estructurales. | es_PE |
dc.description.abstract | The present thesis has been elaborated in the city of Cusco, It intends to analyze
how the physical-mechanical properties of the wood of eucalyptus globules treated with
kerosene, beeswax and cooking oil used for structural use in Pisac vary. The application
is done by prolonged immersion, the scope of the research is descriptive correlational, it
seeks to specify the physical-mechanical properties of the wood that is subjected to an
analysis, which aims to measure and collect information. The study is quantitative and
applied, the objective is to demonstrate experimentally the changes in the wood in its
natural state as well as when it is treated. A brief study of the place was carried out
identifying that it complies with the characteristics, the population study was centered in
the District of Pisac and in the quantification a total of 720 samples were collected. These
samples are classified in four groups, 180 samples in their natural state, 180 samples
treated with Paraffin, 180 samples with Beeswax and 180 with Used Cooking Oil. The
wood was cut, transported and stored according to the Standard, the samples were
evaluated in the laboratory of the Faculty of Engineering and Architecture of the
Universidad Andina del Cusco. The following tests were carried out and the results were
as follows: the wood samples treated with kerosene, beeswax and used cooking oil
showed a significant improvement. In the moisture content test, the treated samples
revealed resistance to agents such as fungi, moths and others. In the Brinell hardness test,
the wood exhibits the ability to withstand loads and resist them effectively. In the tests
of compressive strength parallel and perpendicular to the grain, shear strength and
resistance to static bending show that Eucalyptus Globulus wood treated with Paraffin,
Beeswax and Used Cooking Oil has a significant improvement and can be used for
structural purposes. | en_US |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Andina del Cusco | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/4.0/ | es_PE |
dc.subject | Propiedades físico-mecánicas | es_PE |
dc.subject | Madera eucaliptus glóbulos | es_PE |
dc.subject | Tratamiento parafina | es_PE |
dc.title | Análisis del comportamiento de las propiedades físico-mecánicas de la madera eucaliptus glóbulos, tratada con parafina, cera de abeja y aceite de cocina usado (ACU) para uso estructural - Písac. | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
thesis.degree.grantor | Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.01.01 | es_PE |
renati.advisor.dni | 23836204 | |
renati.advisor.orcid | https://orcid.org/0000-0002-1329-4218 | es_PE |
renati.author.dni | 73204503 | |
renati.discipline | 732016 | es_PE |
renati.juror | Gil Rodríguez, Carmen Cecilia | |
renati.juror | Alanoca Aragón, Alain Elvis | |
renati.juror | Gonzales Mamany, Nico Yheison | |
renati.juror | Tagle Sanchez, Raúl | |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |