dc.contributor.advisor | Gil Rodríguez, Carmen Cecilia | |
dc.contributor.author | Hervas Méndez, Jean Marco | |
dc.date.accessioned | 2023-01-04T15:16:42Z | |
dc.date.available | 2023-01-04T15:16:42Z | |
dc.date.issued | 2022-10-13 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12557/5135 | |
dc.description.abstract | La presente tesis tiene por finalidad, realizar la evaluación de las propiedades físico –
mecánicas del asfalto modificado con polímeros Etileno Vinil Acetato (EVA) y Caucho
Estireno – Butadieno (SBR), así también como un análisis comparativo entre una
mezcla asfáltica convencional o patrón con asfalto BETUTEC IB PG 70 - 28, ya que
en función de las propiedades físico – mecánicas de esta mezcla asfáltica se puede
realizar un mejor análisis comparativo de los resultados obtenidos.
Para la elaboración de estas tres tipos de mezclas asfálticas se utilizó la misma
gradación y los mismos agregados pétreos, el agregado grueso proviene de la cantera
Huambutio, para el agregado fino se utilizó material de la cantera de Cunyaq.
El trabajo de investigación busca evaluar la variación de las propiedades fisicomecanicas
y
costo
de producción
de las
mezclas
asfálticas
modificadas
con
polímeros
EVA
y
SBR,
a
través
de la
sustitución
en peso
de porcentajes
de agregado
por
los
polímeros,
en el
cual
se
busca
obtener
un porcentaje
de sustitución
que
brinde
mejores
propiedades
físico
–
mecánicas
de
la
mezcla
asfáltica
BETUTEC
IB
PG
70
-
28,
a este
porcentaje
de
sustitución
que brinde
mejores
resultados
a las
propiedades
físico
–
mecánicas,
se
denominó,
Porcentaje
Optimo
de
Polímero.
Se fabricaron especímenes de mezcla asfáltica, los mismos que están compuestos
por dos porcentajes de asfalto (4%, 5%, 6%) y porcentaje de polímeros del (1%, 3%,
5%, 8%), estos especímenes fueron sometidos a ensayos de laboratorio para
determinar sus propiedades físicas – mecánicas.
En función a estos resultados y la normativa del manual de carreteras
“Especificaciones Técnicas Generales para Construcción EG – 2013” y el “Manual de
Ensayos de Materiales 2016” del Ministerio de Transportes y Comunicaciones. | es_PE |
dc.description.abstract | The purpose of this thesis is to carry out the evaluation of the physical-mechanical
properties of asphalt modified with Ethylene Vinyl Acetate (EVA) and StyreneButadiene
Rubber
(SBR)
polymers,
as
well
as
a comparative
analysis
between
a
conventional
asphalt
mixture
or
pattern
with
asphalt
BETUTEC
IB
PG
70 -
28,
since
depending
on the
physical-mechanical
properties
of
this
asphalt
mixture,
a better
comparative
analysis
of
the
results
obtained
can
be carried
out.
For the elaboration of these three types of asphalt mixtures, the same gradation and
the same stone aggregates were used, the coarse aggregate comes from the
Huambutio quarry, for the fine aggregate material from the Cunyaq quarry was used.
The research work seeks to evaluate the variation of the physical-mechanical
properties and production cost of modified asphalt mixtures with EVA and SBR
polymers, through the substitution in weight of aggregate percentages for the
polymers, in which it is sought to obtain a percentage of substitution that provides
better physical-mechanical properties of the traditional asphalt mixture, this percentage
of substitution that provides better results to the physical-mechanical properties, was
called Optimum Polymer Percentage.
Asphalt mixture specimens were manufactured, the same ones that are composed of
two percentages of asphalt (4%, 5%, 6%) and a percentage of polymers (1%, 3%, 5%,
8%), these specimens were subjected to laboratory tests to determine their physicalmechanical
properties.
Based on these results and the regulations of the road manual "General Technical
Specifications for Construction EG - 2013" and the "Manual of Materials Tests 2016"
of the Ministry of Transport and Communications. | en_US |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Andina del Cusco | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/4.0/ | es_PE |
dc.subject | Mezcla asfáltica | es_PE |
dc.subject | Asfaltos modificados | es_PE |
dc.subject | Costo de producción | es_PE |
dc.title | Evaluación de las propiedades físico-mecánicas y costo de producción de las mezclas asfálticas modificados con polímeros EVA y SBR en la ciudad del Cusco | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
thesis.degree.grantor | Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.01.00 | es_PE |
renati.advisor.dni | 23877911 | |
renati.advisor.orcid | https://orcid.org/0000-0002-2840-2816 | es_PE |
renati.author.dni | 71254325 | |
renati.discipline | 732016 | es_PE |
renati.juror | Darwin Gutierrez, Heber | |
renati.juror | Zevallos Guzmán, Herbert Jesús | |
renati.juror | Alvarez Alvarez, Goyo | |
renati.juror | Ascue Escalante, Kildare Jussety | |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |