dc.contributor.advisor | Salas Fortón, Edson Julio | |
dc.contributor.author | Arotaipe Gutierrez, Oscar Alfredo | |
dc.contributor.author | Lecaros Manotupa, Juan André | |
dc.date.accessioned | 2022-12-05T14:53:40Z | |
dc.date.available | 2022-12-05T14:53:40Z | |
dc.date.issued | 2022-09-22 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12557/5002 | |
dc.description.abstract | El siguiente trabajo de tesis de investigación que a continuación se expone tiene por título
"EVALUACIÓN DE LAS PROPIEDADES FÍSICO-MECÁNICAS DEL ADOBE CON
REEMPLAZO DE ICHU POR FIBRA DE CABUYA, EN EL SECTOR DE QUISPIQUILLA
DEL DISTRITO DE SAN SEBASTIÁN – CUSCO 2022", el objetivo de esta investigación fue
determinar de forma cuantitativa como varían las propiedades físico mecánicas de un adobe
tradicional con ichu a un adobe hecho de tierra y fibra de cabuya en diferentes proporciones los
mismos que se hicieron en el sector de Quispiquilla, distrito de San Sebastián.
Para este propósito se prepararon en total 125 adobes; 95 unidades de adobe con dimensiones de
40cm x 20cm x 10cm para los ensayos de peso específico, absorción, succión, desgaste por erosión
acelerada de Swinburne y resistencia a la tracción, y 30 unidades de adobe con dimensiones de
20cm x 20cm x 10cm para el ensayo de resistencia a la compresión. Se elaboraron adobes de tierra
tradicionales y se elaboraron adobes de tierra más fibra de cabuya en reemplazo en los porcentajes
de: 0% fibra de cabuya (0.00 gr) + 100% de paja (55gr), 25% fibra de cabuya (13.75gr) + 75% de
paja (41.25gr), 50% fibra de cabuya (27.50gr) + 50% de paja (27.50gr), 75% fibra de cabuya
(41.25gr) + 25% de paja (13.75) y 100% fibra de cabuya (55gr) + 0% de paja (0.00gr).
Para analizar la variación de las propiedades físico-mecánicas del adobe al reemplazar ichu por
fibra de cabuya se realizaron pruebas de peso unitario, absorción, succión, desgaste por erosión
acelerada Swinburne, resistencia a la compresión y resistencia a la tracción, los ensayos se
realización en el laboratorio GEOTEST y de acuerdo a la normativa vigente descrita líneas
adelante.
Los resultados obtenidos nos muestran que, al realizar el reemplazo con fibra de cabuya, es posible
incrementar la resistencia a compresión y la resistencia a tracción en comparativa a un adobe
tradicional y que al 100% del reemplazo se consiguen mejores resultados. | es_PE |
dc.description.abstract | The following research thesis work that is exposed below is entitled "EVALUATION OF THE
PHYSICAL-MECHANICAL PROPERTIES OF ADOBE WITH REPLACEMENT OF ICHU BY
CABUYA FIBER, IN THE QUISPIQUILLA SECTOR OF THE DISTRICT OF SAN
SEBASTIÁN – CUSCO 2022", the objective of this research was to determine quantitatively how
the physical mechanical properties of a traditional adobe with ichu vary to an adobe made of earth
and fiber of cabuya in different proportions the same as were made in the sector of Quispiquilla,
district of San Sebastián.
For this purpose, a total of 125 adobes were prepared; 95 adobe units with dimensions of 40cm x
20cm x 10cm for the tests of specific weight, absorption, suction, accelerated erosion wear of
Swinburne and tensile strength, and 30 units of adobe with dimensions of 20cm x 20cm x 10cm
for the compressive strength test. Traditional earth adobes were made and earth adobes plus cabuya
fiber were made in replacement in the percentages of: 0% cabuya fiber (0.00 gr) + 100% straw
(55gr), 25% cabuya fiber (13.75gr) + 75% straw (41.25gr), 50% cabuya fiber (27.50gr) + 50%
straw (27.50gr), 75% cabuya fiber (41.25gr) + 25% straw (13.75) and 100% cabuya fiber (55gr) +
0% straw (0.00gr).
To analyze the variation of the physical-mechanical properties of adobe when replacing ichu with
cabuya fiber, tests were carried out on unit weight, absorption, suction, wear by accelerated erosion
Swinburne, resistance to compression and tensile strength, the tests were carried out in the
GEOTEST laboratory and in accordance with the current regulations described below.
The results obtained show us that, when performing the replacement with cabuya fiber, it is
possible to increase the compressive strength and tensile strength compared to traditional adobe
and that 100% of the replacement achieves better results. | en_US |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Andina del Cusco | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/4.0/ | es_PE |
dc.subject | Absorción | es_PE |
dc.subject | Succión | es_PE |
dc.subject | Desgaste por erosión | es_PE |
dc.title | Evaluación de las propiedades físico-mecánicas del adobe con reemplazo de Ichu por fibra de cabuya, en el sector de Quispiquilla del distrito de San Sebastián – Cusco 2022 | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
thesis.degree.grantor | Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.01.01 | es_PE |
renati.advisor.dni | 23853692 | |
renati.advisor.orcid | https://orcid.org/0000-0002-6142-8217 | es_PE |
renati.author.dni | 72803774 | |
renati.author.dni | 77672729 | |
renati.discipline | 732016 | es_PE |
renati.juror | Alvarez Monterola, Walter Roberto | |
renati.juror | Montesinos Cervantes, José Alberto | |
renati.juror | Cabezas Mancilla, José Humberto | |
renati.juror | Alvarez Alvarez, Goyo | |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |