dc.contributor.advisor | Montesinos Cervantes, José Alberto | |
dc.contributor.author | Vera Puma, Irving Daniel | |
dc.contributor.author | Huaracha Halanocca, Fredy | |
dc.date.accessioned | 2022-05-12T16:01:15Z | |
dc.date.available | 2022-05-12T16:01:15Z | |
dc.date.issued | 2021-12-15 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12557/4589 | |
dc.description.abstract | La presente tesis de investigación titulada “EVALUACIÓN COMPARATIVA DE LOS
PARÁMETROS GEOTÉCNICOS EN ARCILLAS BLANDAS SATURADAS
MEDIANTE ESTABILIZACIÓN ELECTRO-OSMÓTICA, APV SUCSO AUCAYLLE
PICOL, SAN JERÓNIMO, CUSCO 2019”, pretende conocer las variaciones de los
parámetros geotécnicos de las arcillas blandas saturadas a la aplicación de un flujo eléctrico
y sus implicancias geotécnicas en parámetros como la plasticidad, humedad, resistencia al
corte (ángulo de fricción y cohesión) presentes en la APV Sucso Aucaylle Picol, del distrito
de San Jerónimo, provincia y región del Cusco presentan una estructura compuesta por
filosilicatos que lo hacen material complejo en geotecnia.
Se ha extraído un total de 16 muestras, de ellas 15 son para la comparación, una para
granulometría, las arcillas son de tipología CL según SUCS, a cada una de estas muestras se
les ha hecho los ensayos de: plasticidad, humedad y corte directo para así obtener los
parámetros geotécnicos naturales de las arcillas, luego cada una de ellas se les ha aplicado
el proceso electro-osmótica para registrar la variación en estos parámetros geotécnicos.
Se ha logrado la mejora en los parámetros geotécnicos como la plasticidad que ha registrado
una disminución máxima de 2.38%, la humedad que ha registrado una disminución máxima
de 1.06%, la resistencia al corte que ha registrado un incremento máximo de 2.15°, la
cohesión que ha registrado una disminución máxima de 0.13 kg/cm2 y se ha comparado la
aplicación de este método en campo con la conformación de banquetas utilizando equipo y
personal. El método electro-osmótico tiene un tiempo de adquisición e implementación en
promedio de 13.5 horas menor en comparación con la estabilización mecánica de
conformación de banquetas promedio es de 40 horas en un talud. | es_PE |
dc.description.abstract | The present research thesis entitled “COMPARATIVE EVALUATION OF
GEOTECHNICAL PARAMETERS IN SATURATED SOFT CLAYS THROUGH
ELECTRO-OSMOTIC STABILIZATION, APV SUCSO AUCAYLLE PICOL, SAN
JERÓNIMO, CUSCO 2019“, aims to know the variations of the soft clay parameters
application of an electric flow and its geotechnical implications in parameters such as
plasticity, humidity, resistance to shear (friction angle) and cohesion present in the PAV
Sucso Aucaylle Picol, of the district of San Jerónimo, province and region of Cusco present
a composite structure by phyllosilicates that make it a complex material in geotechnics.
A total of 16 samples have been extracted, of which 15 are for comparison, one for
granulometry, the clays are CL typology according to SUCS, each of these samples has been
tested for: granulometry, plasticity, humidity and direct cutting in order to obtain the natural
geotechnical parameters of the clays, then each of them has been applied the electro-osmotic
process to record the variation in these geotechnical parameters.
An improvement has been achieved in geotechnical parameters such as plasticity that has
registered a maximum decrease of 2.38%, humidity that has registered a maximum decrease
of 1.06%, shear resistance that has registered a maximum increase of 2.15 °, cohesion which
has registered a maximum decrease of 0.13 kg / cm2 and the application of this method in
the field has been compared with the shaping of sidewalks using equipment and personnel.
The electro-osmotic method has an average acquisition and implementation time of 13.5
hours less compared to the mechanical stabilization of bank shaping, average is 40 hours on
a slope. | en_US |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Andina del Cusco | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/4.0/ | es_PE |
dc.subject | Parámetros geotécnicos | es_PE |
dc.subject | Arcillas blandas saturadas | es_PE |
dc.subject | Estabilización electroosmótica | es_PE |
dc.title | Evaluación comparativa de los parámetros geotécnicos en arcillas blandas saturadas mediante estabilización electroosmótica, Apv Sucso Aucaylle Picol, San Jerónimo, Cusco 2019 | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
thesis.degree.grantor | Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.01.01 | es_PE |
renati.advisor.dni | 25001820 | |
renati.author.dni | 45432081 | |
renati.author.dni | 45869557 | |
renati.discipline | 732616 | es_PE |
renati.juror | Álvarez Espinoza, Jorge | |
renati.juror | Álvarez Monterola, Walter Roberto | |
renati.juror | Rios Rabelo, José Luis | |
renati.juror | Solis Tito, José Carlos | |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |