Show simple item record

dc.contributor.advisorSoto Florez, Heiner
dc.contributor.authorPatiño Madueño, Luis Gustavo
dc.date.accessioned2021-10-26T15:23:56Z
dc.date.available2021-10-26T15:23:56Z
dc.date.issued2021-06-10
dc.identifier.urihttps://hdl.handle.net/20.500.12557/4211
dc.description.abstractEl fibrocemento está teniendo un protagonismo muy creciente a nivel constructivo dentro del sistema drywall utilizándose para: techos, tabiquería y revestimientos por su alta durabilidad, aislamiento térmico y fácil instalación, está conformado principalmente por cemento y fibras de origen vegetal. En la presente tesis se planteó la adición de fibras de envases tetrabrik, fibras de aluminio y fibras de polietileno en la elaboración de placas de fibrocemento, evaluando su comportamiento y resistencia y reduciendo el uso de la celulosa en este tipo de materiales, las fibras fueron obtenidas por procesos mecánicos. Se elaboraron tres placas de fibrocemento, se le añadió el 8 por ciento de fibras por total de mezcla a cada placa, se visualizó que las tres placas elaboradas presentaron un fraguado de 24 horas. Con las placas de fibrocemento fabricadas por mi persona se procedió a realizar una evaluación de las propiedades físicas y mecánicas empleando la norma alemana DIN y la norma americana ASTM, las pruebas a las que se sometieron las muestras fueron de: • Resistencia a la flexión • Compresión del espesor • Conductividad térmica Finalmente se realizó una comparativa de los ensayos entre probetas preparadas únicamente con fibrocemento y las probetas de fibrocemento adicionado con fibras de tetrabrik, aluminio y polietileno los resultados obtenidos fueron favorables, contribuyendo con el desarrollo de un nuevo material con un potencial de uso, exceptuando los de resistencia a flexión los cuales tuvieron un bajo rendimiento, y no cumpliendo los parámetros de la normativa DIN.es_PE
dc.description.abstractThe asbestos cement is having a very increasing level constructive prominence inside the system drywall being used for: Roofs, tabiquería and coatings for their high durability, thermal insulation and easy installation, is shaped principally by cement and fibers of vegetal origin. In the present thesis the addition of fibers of containers proposed tetrabrik, fibers of aluminum and polyethylene fibers in the elaboration of plates of asbestos cement, evaluating your behavior and resistance and cutting down on the cellulose in this type of materials, fibers were gotten by mechanical processes. They elaborated three asbestos cement plates, it added to 8 percent of fibers for total from mixture each plate, that the three elaborate plates presented a 24-hour setting visualized itself. With the plates of asbestos cement manufactured by my person it was proceeded to accomplish an evaluation of the physical properties and mechanics using the German standard DIN and the American standard ASTM, the proofs you show them the ones they submitted to they were of: • Bending strength • Compression of thickness • Thermal conductivity Finally came true a comparison of the essays between test tubes prepared only with asbestos cement and the test tubes of asbestos cement added with fibers of tetrabrik, aluminum and polyethylene the obtained results were favorable, contributing with the development of a new material with a potential of use, excepting the ones of resistance to push-up which they had a low performance, and not keeping the normative DIN'S parameters.en_US
dc.formatapplication/pdfes_PE
dc.language.isospaes_PE
dc.publisherUniversidad Andina del Cuscoes_PE
dc.rightsinfo:eu-repo/semantics/openAccesses_PE
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/es_PE
dc.subjectPropiedades mecánicases_PE
dc.subjectAluminioes_PE
dc.subjectProbetases_PE
dc.subjectCelulosaes_PE
dc.subjectConductividad térmicaes_PE
dc.titleEvaluación comparativa de las propiedades físico - mecánicas y de conductividad térmica entre placas de fibrocemento y placas de fibrocemento adicionado con fibras de envases tetrabrik, fibras de aluminio y fibras de polietileno en el mes de diciembre en la ciudad del Cuscoes_PE
dc.typeinfo:eu-repo/semantics/bachelorThesises_PE
thesis.degree.nameIngeniero Civiles_PE
thesis.degree.grantorUniversidad Andina del Cusco. Facultad de Ingeniería y Arquitecturaes_PE
thesis.degree.disciplineIngeniería Civiles_PE
dc.publisher.countryPEes_PE
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.01.01es_PE
renati.advisor.dni41089111
renati.author.dni72489297
renati.discipline732616es_PE
renati.jurorOlazaval Rodríguez, María Milagros
renati.jurorMendoza Escalante, Camilo
renati.jurorCalderón Gonzales, Werner Alfonso
renati.jurorArbulu Jurado, Cesar Edilberto
renati.levelhttps://purl.org/pe-repo/renati/level#tituloProfesionales_PE
renati.typehttps://purl.org/pe-repo/renati/type#tesises_PE


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

info:eu-repo/semantics/openAccess
Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess