dc.contributor.advisor | Chacón Sánchez, Víctor | |
dc.contributor.author | Baca Uscamayta, Carlos Eduardo | |
dc.contributor.author | Vela Cáceres, Luis Fernando | |
dc.date.accessioned | 2021-05-24T02:48:45Z | |
dc.date.available | 2021-05-24T02:48:45Z | |
dc.date.issued | 2020-11-23 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12557/3831 | |
dc.description.abstract | La investigación tiene por título: “EVALUACIÓN DE LAS PROPIEDADES MECÁNICAS
DE UN CONCRETO AUTOCOMPACTANTE ADICIONANDO FIBRAS SINTÉTICAS
SIKACEM®-1 FIBER – CUSCO 2019”. En la investigación se propuso desarrollar un
concreto autocompactante con materiales encontrados en el medio adicionando 100 gr. y 200
gr. de Fibras Sintéticas SikaCem®-1 Fiber por bolsa de cemento, buscando de esta forma
mejorar las propiedades mecánicas del concreto autocompactante. La investigación presenta
un enfoque cuantitativo, de nivel descriptivo, haciendo uso del método hipotético-deductivo y
se presenta un diseño cuasi-experimental pudiendo así verificar las hipótesis planteadas a los
problemas.
La dosificación para obtener el concreto autocompactante se realizó mediante la metodología
del ACI 237R-07 re-aprobada el 2019, donde se cumplieron las características de capacidad
de paso, capacidad de relleno y resistencia a la segregación propios de este tipo de concreto,
cumpliéndose las Directrices para el Hormigón Autocompactante 2006 y del ACI 237R-07.,
se hizo uso del aditivo reductor de agua de alto rango con base policarboxilato Eucoplast
8500 HP, específico para climas fríos y uso en concretos autocompactantes .
Las principales propiedades mecánicas evaluadas son el peso unitario, resistencia a la
compresión, módulo de rotura y módulo de elasticidad, analizándose también el costo de
producción a nivel de insumos por metro cubico de concreto. Para ello se realizó un muestreo
no probabilístico por conveniencia donde la muestra es igual a la población, siendo un total de
90 especímenes, 45 briquetas de 10 x 20 cm y 45 viguetas de 15 cm x 15 cm x 50 cm.,
desarrollándose y analizándose tres tipos de concreto, un concreto autocompactante patrón, un
concreto autocompactante patrón con 100 gr. de fibra sintética por bolsa de cemento y un
concreto autocompactante patrón con 200 gr. de fibra sintética por bolsa de cemento.
De acuerdo a la evaluación de las propiedades mecánicas del concreto autocompactante, la
adición de las Fibras Sintéticas SikaCem®-1 Fiber mejoran levemente las propiedades
mecánicas hasta en un 4.54% el peso unitario, en un 11.39% la resistencia a la compresión, un
12.47% el módulo de rotura y hasta en un 12.08% el módulo de elasticidad. Concluyendo que
el uso de la Fibra Sintética en el Concreto Autocompactante es favorable. | es_PE |
dc.description.abstract | The investigation has for title “EVALUATION OF THE MECHANICAL PROPERTIES OF
A SELF-COMPACTING CONCRETE ADDING SYNTHETIC FIBERS SIKACEM®-1
FIBER - CUSCO 2019“. The research proposes to develop a self-compacting concrete with
materials that are found in the city, adding 100 gr. and 200 gr. of Synthetic Fibers
“SikaCem®-1 Fiber” per bag of cement, seeking in this way to enhance the mechanical
properties of self-compacting concrete. The research presents a quantitative approach, in a
descriptive level, making use of the hypothetical-deductive method and a quasi-experimental
design, thus being able to verify the hypotheses proposed to the problems.
The dosage to obtain self-compacting concrete was made using the ACI 237R-07´s
methodology reapproved in 2019, where the characteristics of passing ability, filling ability
and stability that are typical of this type of concrete were met, complying with the Guidelines
for Self-Compacting Concrete 2006 and ACI 237R-07., for the design of the dosage was used
the high-range water-reducing additive (HRWRA) based on polycarboxylate called Eucoplast
8500 HP, specific for cold climates and for use in self-compacting concrete.
The main mechanical properties evaluated are the unit weight, compressive strength, flexural
strength and the elastic modulus, also analyzing the cost of production at the level of materials
necessary for a cubic meter of concrete. For this, a non-probabilistic convenience sampling
was carried out where the sample is equal to the population, with a total of 90 specimens, 45
cylinder concrete specimens of 10 x 20 cm and 45 prismatic concrete specimens of 15 cm x
15 cm x 50 cm., Developing and analyzing three types of concrete, a standard selfcompacting
concrete, a standard
self-compacting
concrete
with
100 gr.
of
Synthetic
Fibers
per
bag
of cement and a standard self-compacting synthetic concrete with 200 gr. of Synthetic
Fibers synthetic fiber per bag of cement.
According to the evaluation of the mechanical properties of self-compacting concrete, the
addition of the Synthetic Fibers SikaCem®-1 Fiber slightly improve the mechanical
properties, up to 4.54% the unit weight, up to 11.39% the compressive strength, up to 12.47%.
the flexural strength and up to 12.08% the elastic modulus. Concluding that the use of
Synthetic Fiber in Self-compacting Concrete is favorable. | en_US |
dc.description.uri | Tesis | es_PE |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Andina del Cusco | es_PE |
dc.rights | info:eu-repo/semantics/openAccess | es_PE |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/2.5/pe/ | es_PE |
dc.source | Universidad Andina del Cusco | es_PE |
dc.source | Repositorio Institucional UAC | es_PE |
dc.subject | Concreto autocompactante | es_PE |
dc.subject | Resistencia a la compresión | es_PE |
dc.subject | Módulo de rotura | es_PE |
dc.subject | Módulo de elasticidad | es_PE |
dc.subject | Fibra sintética | es_PE |
dc.title | Evaluación de las propiedades mecánicas de un concreto autocompactante adicionando fibras sintéticas Sikacem®-1 Fiber – Cusco 2019 | es_PE |
dc.type | info:eu-repo/semantics/bachelorThesis | es_PE |
thesis.degree.name | Ingeniero Civil | es_PE |
thesis.degree.grantor | Universidad Andina del Cusco. Facultad de Ingeniería y Arquitectura | es_PE |
thesis.degree.level | Titulo Profesional | es_PE |
thesis.degree.discipline | Ingeniería Civil | es_PE |
dc.publisher.country | PE | es_PE |
dc.subject.ocde | https://purl.org/pe-repo/ocde/ford#2.01.01 | en_US |
renati.advisor.dni | 23807993 | |
renati.advisor.orcid | https://orcid.org/0000-0001-6891-6902 | en_US |
renati.author.dni | 78938223 | |
renati.author.dni | 70656431 | |
renati.discipline | 732016 | |
renati.juror | Álvarez Espinoza, Jorge | |
renati.juror | Álvarez Monterola, Walter Roberto | |
renati.juror | Chura Cortez, Cesar Augusto | |
renati.juror | Soto Florez, Heiner | |
renati.level | https://purl.org/pe-repo/renati/level#tituloProfesional | es_PE |
renati.type | https://purl.org/pe-repo/renati/type#tesis | es_PE |