dc.contributor.advisor | Ascue Lovón, Piatnitzky | |
dc.contributor.author | Triveño Ramos, Paola Ly | |
dc.date.accessioned | 2021-01-21T20:45:11Z | |
dc.date.available | 2021-01-21T20:45:11Z | |
dc.date.issued | 2020-09-18 | |
dc.identifier.uri | https://hdl.handle.net/20.500.12557/3583 | |
dc.description.abstract | En la Universidad Nacional de San Antonio Abad del Cusco, día a día los docentes, los
trabajadores administrativos y estudiantes, se encuentran expuestos a riesgos y peligros que pueden
causar accidentes, generar lesiones permanentes, enfermedades e incluso la muerte de los
trabajadores, el presente trabajo de tesis titulado “Diseño de un sistema de gestión en seguridad y
salud en el trabajo basado en la norma ISO 45001 de la Escuela Profesional de Ingeniería
Mecánica de la Universidad Nacional de San Antonio Abad del Cusco – 2018” tuvo como objetivo
general: Identificar los riesgos y medidas de control que permita el diseño de un Sistema de
Gestión de Seguridad y Salud en el trabajo basado en la norma ISO 45001 para la Escuela
Profesional de Ingeniería Mecánica de la Universidad Nacional de San Antonio Abad del Cusco -
2018. El enfoque metodológico usado fue el cualitativo, nivel no experimental, descriptivo
exploratorio, para lo cual se hizo uso de la estadística descriptiva y la aplicación de las estrategias
de observación y la Lista de Verificación de Lineamientos del Sistema de Gestión de Seguridad y
Salud.
En orden de conseguir el objetivo general se efectuó un diagnóstico situacional actual de
la escuela profesional de Mecánica en materia de implementación del sistema de gestión de
seguridad y salud en el trabajo según la normatividad vigente, se identificó del proceso de
implementación de sistema de gestión de seguridad y salud en el trabajo actual de la UNSAAC,
realizando un mapeo de procesos, y la identificación de peligros, y evaluación de riesgos mediante
monitoreo y mediciones.
Se determinaron las medidas de control para los riesgos y como último se elaboró un
sistema de seguridad y salud en el trabajo de acuerdo a la Norma ISO 45001 y relacionada con la
ley 29783, para lo cual se detalló la documentación requerida para poder acceder a tener un sistema de gestión en seguridad y salud en el trabajo basado en la norma ISO 45001:2018 la misma que se
recomienda ser aplicada de manera integral en toda la UNSAAC. | es_PE |
dc.description.abstract | Day by day teachers, administrative workers and students in the National University of San
Antonio Abad of Cusco, are exposed to the risks and dangers that can cause them accidents,
permanent injuries, illnesses and even the death, the present work of thesis entitled “Design of a
management system in occupational safety and health based on the ISO 45001 standard of the
Professional School of Mechanical Engineering of the National University of San Antonio Abad
of Cusco - 2018“ had as a general objective was: Identify the risks and control measures that allow
the design a safety and health management system based on ISO 45001in the aforementioned
population. The methodological approach used was the qualitative, non-experimental level,
exploratory descriptive research, for which use was made of the descriptive statistics and the
application of the observation strategies and the Checklist of Guidelines of the Management
System of Security and health.
In order to achieve the general objective, a current situational diagnosis of the professional
school of mechanics was made regarding the implementation of the occupational health and safety
management system according to current regulations, the process of implementation of the
management system was identified. Occupational health and safety at the current UNSAAC,
process mapping, and hazard identification, and risk assessment through monitoring and
measurements. The control measures for the risks were determined and as a last one a system of
safety and health at work was developed according to the ISO 45001 Standard and it's relation
with the law 29783, for which the documentation required to be able to detail access to have a
management system in occupational safety and health based on the ISO 45001: 2018 standard,
which is recommended to be applied comprehensively throughout the UNSAAC. | en_US |
dc.description.uri | Tesis | es_PE |
dc.format | application/pdf | es_PE |
dc.language.iso | spa | es_PE |
dc.publisher | Universidad Andina del Cusco | es_PE |
dc.rights | info:eu-repo/semantics/restrictedAccess | es_PE |
dc.source | Universidad Andina del Cusco | es_PE |
dc.source | Repositorio Institucional UAC | es_PE |
dc.subject | Riesgos | es_PE |
dc.subject | Peligros | es_PE |
dc.subject | Accidentes laborales | es_PE |
dc.subject | Colaboradores | es_PE |
dc.title | Diseño de un Sistema de Gestión en Seguridad y Salud en el trabajo basado en la Norma ISO 45001 de la “Escuela Profesional de Ingeniería Mecánica de la Universidad Nacional de San Antonio Abad del Cusco”, 2018 | es_PE |
dc.type | info:eu-repo/semantics/masterThesis | es_PE |
thesis.degree.name | Maestro en Seguridad Industrial y Medio Ambiente | es_PE |
thesis.degree.grantor | Universidad Andina del Cusco. Escuela de Pos Grado | es_PE |
thesis.degree.level | Maestria | es_PE |
thesis.degree.discipline | Seguridad Industrial y Medio Ambiente | es_PE |