Propuesta de mejoramiento de las propiedades físico mecánicas del material granular de la cantera km 5+400, para la estabilización de la superficie de rodadura utilizando yeso y aditivo sika en el camino vecinal cu-1432 del distrito de Sicuani, 2021.
Date
2022-04-21Author
Pérez Torres, Mike
Cjuro Cutipa, Jheyson Edgar
Advisor
Montesinos Cervantes, José Alberto
Metadata
Show full item recordAbstract
El objetivo de la tesis es dar una propuesta para mejorar las propiedades físico mecánicas
del material granular de la cantera km 5+400 del camino vecinal CU-1432 del distrito de Sicuani,
realizando la incorporación de yeso al material granular y aditivo Sika-1 al agua.
La metodología para el desarrollo de la tesis fue la extracción de la muestra de material
granular de cantera km 5+400 del camino vecinal CU-1432, posteriormente se realizó los ensayos
de laboratorio del material granular natural sin la adición de yeso ni aditivo Sika-1, luego se realizó
ensayos de laboratorio del material granular con la adición de yeso y aditivo Sika-1 con las
siguientes proporciones, la adición de yeso al 0%, 4%, 6%, 8% y 10% al peso de material granular
y de aditivo Sika-1 al 0%, 4%, 6%, 8% y 10% al volumen de agua a utilizar.
Se concluye que al realizar las pruebas de laboratorio con los diferentes porcentajes y
combinaciones de adición de aditivo Sika-1 y de yeso se determina mediante el análisis de
resultados que la dosificación óptima para el índice de plasticidad sea de 6.8% obteniéndose así
un IP de 6.74%, según la ecuación para densidad el porcentaje óptimo de adición será de 6.8%
llegando así a tener un valor de densidad de 2.029 gr/cm3 y para CBR no existe una dosificación
optima ya que según las ecuaciones halladas a mayor adición de yeso y a mayor adición de aditivo
Sika-1 el CBR seguirá creciendo, con los resultados se determinó que con la adición de aditivo
Sika-1 y de yeso se mejorará las propiedades físico mecánicas del material granular de la cantera
km 5+400 del camino vecinal CU-1432 del distrito de Sicuani. The objective of the thesis is to give a proposal to improve the physical-mechanical
properties of the granular material of the quarry km 5+400 of the local road CU-1432 of the district
of Sicuani, incorporating gypsum into the granular material and Sika-1 additive to the Water.
The methodology for the development of the thesis was the extraction of the sample of
granular material from the quarry km 5 + 400 of the local road CU-1432, later the laboratory tests
of the natural granular material were carried out without the addition of plaster or Sika-1, then
laboratory tests of the granular material were carried out with the addition of gypsum and Sika-1
additive with the following proportions, the addition of gypsum at 0%, 4%, 6%, 8% and 10% to
the weight of granular material and Sika-1 additive at 0%, 4%, 6%, 8% and 10% to the volume of
water to be used.
It is concluded that when carrying out the laboratory tests with the different percentages
and combinations of addition of Sika-1 additive and plaster, it is determined through the analysis
of results that the optimal dosage for the plasticity index is 6.8%, thus obtaining an IP of 6.74%,
according to the equation for density, the optimal percentage of addition will be 6.8%, thus
reaching a density value of 2.029 gr/cm3 and for CBR there is no optimal dosage since, according
to the equations found, the greater the addition of gypsum and the greater addition of Sika-1
additive the CBR will continue to grow, with the results it was determined that with the addition
of Sika-1 additive and plaster the physical-mechanical properties of the granular material of the
quarry km 5 + 400 of the local road CU- 1432 of the Sicuani district.