Show simple item record

dc.contributor.advisorFarfán Escalante, Guido Elías
dc.contributor.authorHuñuruco Salas, Libsy Kely
dc.contributor.authorVargas Mérida, Jorge Mauricio
dc.date.accessioned2018-06-04T13:52:54Z
dc.date.available2018-06-04T13:52:54Z
dc.date.issued2018-04-17
dc.identifier.urihttps://hdl.handle.net/20.500.12557/1674
dc.description.abstractEsta investigación se realizó en la Fábrica de Tejidos Marangani S.A., empresa textil que produce chalinas, frazadas y mantas, el enfoque está en la producción de mantas. El área de producción se divide en 7 secciones que vienen a ser: lavados, teñidos, hilados, tejido, acabados, mantenimiento y caldero. Mediante un diagnóstico se determina la necesidad de las secciones de lavado, teñido, hilado, tejido y acabados se encuentren secuencialmente debido a la continuidad de las actividades de producción, el problema se encuentra en la sección de teñidos que se encuentra a 154.38m. separado de la sección de lavados, también en la sección caldero la cual abastece con vapor de agua a la sección lavados, teñidos y acabados, la distancia que tiene el recorrido del vapor entre estas secciones es de 89.806m., 59.196m. y 65.862m. respectivamente, el tiempo de producción para un lote de 600 mantas es 1582 minutos. El objetivo es realizar una redistribución de planta en el área de producción para incrementar su productividad. Se utilizó la metodología de la redistribución de planta, técnicas e instrumentos para la recolección de datos. Se realiza el Diagrama de Análisis del Proceso para la elaboración de un lote de 600 mantas, se describe la maquinaria para desarrollar el método de Guerchet y la tabla de relaciones, se realiza el diagrama de recorrido antes de la redistribución y se realiza el cálculo de la productividad antes de realizar la redistribución y el resultado es de 0.3034 lote/8h lo cual equivale a 182 mantas/8 h. Se procedió con la aplicación de la redistribución en la sección de teñidos y caldero. La distancia que separa lavado de teñido es de 43.77m., la distancia de recorrido del vapor del caldero a las secciones de lavado, teñido y acabado es de 29.80m., 31.02m. y 62.30m. respectivamente con estas distancias el tiempo de producción para un lote de 600 mantas demanda 1376 minutos. Con este resultado se realiza el cálculo de la productividad aplicada la redistribución y el resultado es de 0.3488 lote/8 h lo cual equivale a 209 mantas/8 h, de tal manera que se logra incrementar la productividad en 14.96%.es_PE
dc.description.abstractThis research was carried out in the Marangani Textile Factory S.A., a textile company that produces shawls, blankets and blankets, the focus is on the production of blankets. The production area is divided into 7 sections that come to be: washing, dyeing, spinning, weaving, finishing, maintenance and cauldron. By means of a diagnosis it is determined the need of the sections of washing, dyeing, spinning, weaving and finishes are sequentially due to the continuity of the production activities, the problem is in the dyeing section that is at 154.38m. separated from the section of washes, also in the cauldron section which supplies with water vapor to the section washed, dyed and finished, the distance that has the route of the steam between these sections is 89.806m., 59.196m. and 65,862m. respectively, the production time for a batch of 600 blankets is 1582 minutes. The objective is to carry out a redistribution of the plant in the production area to increase its productivity. The methodology of the redistribution of the plant, techniques and instruments for data collection was used. The Process Analysis Diagram is prepared for the elaboration of a batch of 600 blankets, the machinery to develop the Guerchet method and the relationship table is described, the route diagram is made before the redistribution and the calculation of the the productivity before reallocating the redistribution and the result is 0.3034 batch / 8 h which equals 182 blankets / 8 h. We proceeded with the application of the redistribution in the dyeing and cauldron section. The distance that separates the dyeing wash is 43.77m., The distance of travel from the steam of the cauldron to the washing, dyeing and finishing sections is 29.80m., 31.02m. and 62.30m. respectively with these distances the production time for a batch of 600 blankets demands 1376 minutes. With this result the calculation of the applied redistribution productivity is made and the result is 0.3488 batch / 8 h which is equivalent to 209 blankets / 8 h, in such a way that it is possible to increase the productivity in 14.96%.en_US
dc.description.uriTesises_PE
dc.formatapplication/pdfes_PE
dc.language.isospaes_PE
dc.publisherUniversidad Andina del Cuscoes_PE
dc.rightsinfo:eu-repo/semantics/restrictedAccesses_PE
dc.sourceUniversidad Andina del Cuscoes_PE
dc.sourceRepositorio Institucional - UACes_PE
dc.subjectProductivdades_PE
dc.subjectDistribución--Plantaes_PE
dc.subjectCalderoes_PE
dc.subjectTeñidoses_PE
dc.subjectTextileríaes_PE
dc.titleRedistribución de planta en el área de producción para incrementar la productividad de la fábrica de tejidos Marangani S.A. Cusco -2017.es_PE
dc.typeinfo:eu-repo/semantics/bachelorThesises_PE
thesis.degree.nameIngeniero Industriales_PE
thesis.degree.grantorUniversidad Andina del Cusco. Facultad de Ingeniería y Arquitecturaes_PE
thesis.degree.levelTitulo Profesionales_PE
thesis.degree.disciplineIngeniería Industriales_PE


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record